Reviews
PPC/Mobile Device Hardware/Accessories
PDair 3 in 1 X50 Stylus
| PDair 3 in 1 X50 Stylus |
|
|
|
| Written by Gray Rentz | |
| Monday, 07 March 2005 | |
|
PDair 3 in 1 X50 Series Stylus The PDair 3 in 1 Stylus is a replacement for the existing stylus. Not only does it function and look like the normal stylus, it also works as a ball point pen (black ink) and a reset pin.
On the tip, there is the regular stylus end. This then pulls off to reveal a black pen. The tip does take a bit of effort to get off, but this as good as it prevents it from coming off while you are taking the stylus out of your X50. The pen works well and is nice and smooth to write with.
The reset pin comes off of the top. The top part unscrews to reveal a plastic tip that you can use to press the reset button on your X50. In my mind this is not needed as the stylus tip works fine. I also noticed that after about a month of use, the ink from the pen started getting on the tip of the reset pin (as the ink channel is inside the stylus). But do not worry, the ink never came out or could come out as the reset pin part just had a bit of ink on the tip, and the reset pin is screwed in. Overall this is a great idea. I do not think they need to add the reset pin to this though as the stylus tip works fine for resets on the X50. One thing to note is that the whole stylus is a bit bigger around then the standard stylus. It still fits in the X50, but the fit is a bit tighter. I could also see the tip coming off and getting stuck in the X50 with a lot of use and not being careful. Although I used it for a month without any problems at all. I did love having a pen with my X50 at all times though! Thanks to PDair for the review sample! |
|
| Last Updated ( Wednesday, 30 March 2005 ) |
| < Prev | Next > |
|---|